View B39212B8524P810_9031408.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer wcdma band 4/ cdma 1x aws band series/type: ordering code: b8524 B39212B8524P810 date: version: july 12, 2013 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone wcdma band 4 / cdma 1x aws systems n low insertion attenuation n low amplitude ripple n usable passband 45 mhz n single-ended to balanced transformation in anten- na-rx path n impedance transformation 50 w to 100 w in antenna- rx path n high isolation between tx and rx features n package size 1.8 x 1.4 mm 2 , package height 0.475 mm max. n rohs compatible n approx. weight 0.005g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n balanced rx port, unbalanced tx port n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 123 6 5 75 6 123 7 0.475 max. 0.7 pin configuration n 3 tx input, unbalanced n 1,8 rx output, balanced n 6 antenna n 2, 4, 5, 7 to be grounded 4,5 1 3 8 2,7 6
3 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for w-cdma band 4 temperature range for specification: t = C15 ?c to +80 ?c antenna terminating impeda-nce: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics tx - antenna min. typ. @ 25 ?c max. center frequency f c 1732.5 mhz maximum insertion attenuation a @f carrier 1712.4 ... 1752.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (10). 1.1 1.8 db amplitude ripple (p-p) da @f carrier 1712.4 ... 1752.6 mhz da wcdma 1) 0.4 0.9 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 1712.4 ... 1752.6 mhz 1.0 2.5 % input vswr (tx port) 1710.0 ... 1755.0 mhz 1.6 1.9 output vswr (ant port) 1710.0 ... 1755.0 mhz 1.5 1.9 attenuation a 1.0 ... 728.0 mhz 30 45 db 728.0 ... 764.0 mhz 35 45 db 851.0 ... 894.0 mhz 35 42 db 1310.0 ... 1355.0 mhz 24 38 db 1565.42 ... 1573.374mhz 40 48 db 1573.374 ... 1577.466mhz 45 50 db 1577.466 ... 1585.42 mhz 40 51 db 1597.5515... 1605.886mhz 40 47 db 1805.0 ... 1880.0 mhz 20 46 db 1930.0 ... 1990.0 mhz 40 46 db @f carrier 2112.4 ... 2152.6 mhz a wcdma 1) 42 46 db 2400.0 ... 2500.0 mhz 30 39 db 2565.0 ... 2677.0 mhz 5 35 db 3410.0 ... 3510.0 mhz 25 31 db 5000.0 ... 5120.0 mhz 10 20 db 5120.0 ... 5350.0 mhz 12 20 db 5350.0 ... 5725.0 mhz 10 26 db 5725.0 ... 5850.0 mhz 18 25 db 5850.0 ... 6000.0 mhz 10 25 db
4 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for w-cdma band 4 temperature range for specification: t = C15 ?c to +80 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics antenna - rx min. typ. @ 25 ?c max. center frequency f c 2132.5 mhz maximum insertion attenuation a @f carrier 2112.4 ... 2152.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (10). 1.6 2.3 db amplitude ripple (p-p) da @f carrier 2112.4 ... 2152.6 mhz da wcdma 1) 0.4 1.0 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 2112.4 ... 2152.6 mhz 1.1 2.5 % input vswr (rx port) 2110.0 ... 2155.0 mhz 1.5 2.0 output vswr (ant port) 2110.0 ... 2155.0 mhz 1.7 2.0 cmrr (|s 32 -s 42 |/|s 32 +s 42 |) 2110.0 ... 2155.0 mhz 20 3) 3) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr. 29 db
5 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for w-cdma band 4 temperature range for specification: t = C15 ?c to +80 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics antenna - rx min. typ. @ 25 ?c max. attenuation a 1.0 ... 400.0 mhz 57 > 70 db 400.0 ... 1310.0 mhz 40 67 db 1310.0 ... 1355.0 mhz 43 65 db 1355.0 ... 1710.0 mhz 35 49 db @f carrier 1712.4 ... 1752.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (10). 45 60 db 1755.0 ... 1910.0 mhz 15 53 db 1910.0 ... 1955.0 mhz 35 58 db 1955.0 ... 2025.0 mhz 15 37 db 2240.0 ... 2300.0 mhz 15 36 db 2300.0 ... 2400.0 mhz 30 46 db 2400.0 ... 2496.0 mhz 40 47 db 2496.0 ... 2690.0 mhz 40 52 db 2690.0 ... 3300.0 mhz 35 45 db 3300.0 ... 3800.0 mhz 45 51 db 3820.0 ... 3910.0 mhz 40 50 db 3910.0 ... 4220.0 mhz 35 50 db 4220.0 ... 4310.0 mhz 40 49 db 4310.0 ... 5150.0 mhz 35 47 db 5150.0 ... 5850.0 mhz 37 46 db 5850.0 ... 6000.0 mhz 35 42 db
6 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for w-cdma band 4 temperature range for specification: t = C15 ?c to +80 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics tx - rx min. typ. @ 25 ?c max. differential mode isolation a 1574.0 ... 1577.0 mhz 40 68 db @f carrier 1712.4 ... 1752.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (10). 55 59 db @f carrier 2112.4 ... 2152.6 mhz a wcdma 1) 50 57 db 3410.0 ... 3520.0 mhz 20 60 db 5120.0 ... 5275.0 mhz 20 55 db common mode isolation a @f carrier 1712.4 ... 1752.6 mhz a wcdma 1) 46 51 db
7 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics tx - antenna min. typ. @ 25 ?c max. center frequency f c 1732.5 mhz maximum insertion attenuation a 1710.0 ... 1755.0 mhz 1.3 2.0 db amplitude ripple (p-p) da 1710.0 ... 1755.0 mhz 0.5 1.2 db input vswr (tx port) 1710.0 ... 1755.0 mhz 1.6 1.9 output vswr (ant port) 1710.0 ... 1755.0 mhz 1.5 1.9 attenuation a 1.0 ... 728.0 mhz 30 45 db 728.0 ... 764.0 mhz 35 45 db 851.0 ... 894.0 mhz 35 42 db 1310.0 ... 1355.0 mhz 24 38 db 1565.42 ... 1573.374mhz 40 48 db 1573.374 ... 1577.466mhz 45 50 db 1577.466 ... 1585.42 mhz 40 51 db 1597.5515... 1605.886mhz 40 47 db 1805.0 ... 1880.0 mhz 20 46 db 1930.0 ... 1990.0 mhz 40 46 db 2110.0 ... 2155.0 mhz 42 46 db 2400.0 ... 2500.0 mhz 30 39 db 2565.0 ... 2677.0 mhz 5 35 db 3410.0 ... 3510.0 mhz 25 31 db 5000.0 ... 5120.0 mhz 10 20 db 5120.0 ... 5350.0 mhz 12 20 db 5350.0 ... 5725.0 mhz 10 26 db 5725.0 ... 5850.0 mhz 18 25 db 5850.0 ... 6000.0 mhz 10 25 db
8 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics antenna - rx min. typ. @ 25 ?c max. center frequency f c 2132.5 mhz maximum insertion attenuation a 2110.0 ... 2155.0 mhz 1.7 2.3 db amplitude ripple (p-p) da 2110.0 ... 2155.0 mhz 0.4 1.0 db input vswr (rx port) 2110.0 ... 2155.0 mhz 1.5 2.0 output vswr (ant port) 2110.0 ... 2155.0 mhz 1.7 2.0 cmrr (|s 32 -s 42 |/|s 32 +s 42 |) 2110.0 ... 2155.0 mhz 20 1) 1) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr. 29 db attenuation a 1.0 ... 400.0 mhz 57 > 70 db 400.0 ... 1310.0 mhz 40 67 db 1310.0 ... 1355.0 mhz 43 65 db 1355.0 ... 1710.0 mhz 35 49 db 1710.0 ... 1755.0 mhz 45 60 db 1755.0 ... 1910.0 mhz 15 53 db 1910.0 ... 1955.0 mhz 35 58 db 1955.0 ... 2025.0 mhz 15 37 db 2240.0 ... 2300.0 mhz 15 36 db 2300.0 ... 2400.0 mhz 30 46 db 2400.0 ... 2496.0 mhz 40 47 db 2496.0 ... 2690.0 mhz 40 52 db 2690.0 ... 3300.0 mhz 35 45 db 3300.0 ... 3800.0 mhz 45 51 db 3820.0 ... 3910.0 mhz 40 50 db 3910.0 ... 4220.0 mhz 35 50 db 4220.0 ... 4310.0 mhz 40 49 db 4310.0 ... 5150.0 mhz 35 47 db 5150.0 ... 5850.0 mhz 37 46 db 5850.0 ... 6475.0 mhz 35 42 db
9 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics for cdma 1x aws band temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 2.6nh rx terminating impedance: z rx = 100 w (balanced) || 18nh tx terminating impedance: z tx =50 w b8524 characteristics tx - rx min. typ. @ 25 ?c max. differential mode isolation a 1574.0 ... 1577.0 mhz 40 68 db 1710.0 ... 1755.0 mhz 55 58 db 2110.0 ... 2155.0 mhz 50 56 db 3410.0 ... 3520.0 mhz 20 60 db 5120.0 ... 5275.0 mhz 20 55 db common mode isolation a 1710.0 ... 1755.0 mhz 46 51 db
10 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for umts-passband, f carrier ranges from 882.4 mhz (lowest tx channel) to 912.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: s s d21 f () h rrc ff carrier C () 2 f d h rrc f () 2 f1 = d
11 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state according to iec 60068-2-67cy v esd voltage v esd 50 2) 2) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at p in source and load impedance 50 w 1710.0 ... 1755.0 mhz elsewhere 29 10 dbm dbm continuous wave 50?c, 5.000 h }
12 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet power transfer function tx-ant: power transfer function tx-ant (passband):
13 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. power transfer function tx-ant (wideband): power transfer function ant-rx:
14 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet power transfer function ant-rx (passband): power transfer function ant-rx (wideband):
15 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. power transfer function tx-rx isolation: power transfer function tx-rx isolation (wideband):
16 july 12, 2013 b8524 1732.5 / 2132.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet vswrs at tx, rx and ant:
17 july 12, 2013 b8524 1732.5 / 2132.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8524 ordering code B39212B8524P810 marking and package c61157-a8-a72-1-27 packaging f61074-v8259-z000-2-27 date codes l_1126 s-parameters b8524_nb_un.s4p, b8524_wb_un.s4p see file header for pin/port assignement. soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2013. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
18 july 12, 2013 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39212B8524P810

	To Download B39212B8524P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .